
ZENEC ZE-RCE3702
Fiat Ducato III | 250/251 | as of 2006 |
Citroen Jumper II | 250/250D/250L | as of 2006 |
Peugeot Boxer | 250/251 | as of 2006 |
ZENEC‘s rear view camera ZE-RCE3702 replaces the original third brake light of your FIAT Ducato, CITROËN Jumper or Peugeot Boxer.
Of course, you don‘t have to do without the third brake light. An LED brake light is integrated in the ZENEC camera module, for simple “Plug & Play“ retrofit connecting to the specific OE vehicle connector.
An integrated microphone and an IR-LED night illumination system are part of the ZE-RCE3702 cam as well.
This product is compatible with a wide variety of 2-DIN A/V receivers of the aftermarket and the ZENEC E>GO product line up, including ZENEC 2-DIN infotainers and naviceivers.
Image device | 1/3“ / 8.5 mm Sony CCD Sensor |
Lens focal length | f2.6 |
TV system | NTSC / 60 Hz |
View angle | 120° (D) x 102° (H) x 77° (V) |
Native sensor resolution | 752 (H) x 494 (V) pixels |
Resolution of video-out | > 600 TV lines |
Frame rate | 60 fields/sec |
Signal to noise ratio | > 48 dB |
Light sensitivity | 0.1 Lux, 0 Lux if IR on |
Video output | 1.0 Vp-p, 75 ohms CVBS |
White balance | Auto |
Backlight compensation | Auto |
Gamma correction | 0.45 |
Gain control | Auto |
Sync system | Auto |
Power supply | DC 12 V |
Current consumption | 150 mA (DC 12 V) / ≤ 1800 mW |
IP protection rating | IP68 |
Operating temperature | -20° C ~ +70° C |