AXTON ATB20STP - Aktivsubwoofer 20 cm/8"
289,00 CHF
Bruttopreis
|
AXTON ATB20STP Nominal power handling |
1 x 90 W RMS @ 4 ohms (< 1.0% THD / 14.4 V) |
| Peak power handling | 1 x 110 W max. @ 4 ohms (< 10% THD / 14.4 V) |
| Frequency response | 25 – 100 Hz |
| Variable low-pass filter | 50 – 150 Hz / 12 dB/Okt. |
| Switchable bass boost | 0 dB / 6 dB |
| RCA input sensitivity | 165 mV – 5 V |
| High Level input sensitivity | 1,0 – 10 V |
| Signal / Noise ratio | > 90 dB |
| Dimensions (Ø x H, mm) | Ø 500 x 155 |
| Net Weight | 10 kg |
- Active subwoofer for spare tire well
- Enclosure fi ts tire wells with 50 cm diameter and center clamp
- 20 cm/8“ long stroke bass driver in vented enclosure
- High cross section port for low air noise
- Built-in amp module with 110 W power rating
- 12 dB/oct. electronic crossover with low-pass fi lter
- Switchable bass boost
- Amp auto turn-on trigger for High Level inputs
- Variable input gain for RCA and High Level inputs
ATB20STP
chat
Kommentare (0)
Aktuell keine Kunden-Kommentare
|
AXTON ATB20STP Nominal power handling |
1 x 90 W RMS @ 4 ohms (< 1.0% THD / 14.4 V) |
| Peak power handling | 1 x 110 W max. @ 4 ohms (< 10% THD / 14.4 V) |
| Frequency response | 25 – 100 Hz |
| Variable low-pass filter | 50 – 150 Hz / 12 dB/Okt. |
| Switchable bass boost | 0 dB / 6 dB |
| RCA input sensitivity | 165 mV – 5 V |
| High Level input sensitivity | 1,0 – 10 V |
| Signal / Noise ratio | > 90 dB |
| Dimensions (Ø x H, mm) | Ø 500 x 155 |
| Net Weight | 10 kg |